SERVPRO is ready to help with mold cleanup and remediation for all types of Suffolk County businesses

2/17/2020 (Permalink)

Our priority is to keep you informed of your specific remediation solution and get your commercial property’s mold damage concerns under control.

Mold colonization in commercial facilities and warehouses can quickly get out of control without the appropriate intervention, SERVPRO is here to help with mold assessment, cleanup and remediation for all types of Long Island commercial facilities.

Commercial flooding and other water damage most often have far reaching consequences on commercial property, leaving the need for many different types of property damage restoration services including water removal, demolition, deodorization and decontamination, drying and dehumidifying and rebuilding. Whether your property just weathered a season of heavy rain, experienced a common appliance malfunction or plumbing leak, commercial water damage cleanup and restoration can be complicated. It most often requires a detailed set of steps to make sure the water is properly extracted, cleaned up, dried and mitigated, when these steps aren’t taken, and moisture continues to plaque your business you could end up with a mold infestation and the need for professional mold remediation. Any commercial property can quickly become infested with mold if a source of water is present, the key to preventing excessive mold growth is to control moisture. Mold grows quickly and can spread throughout a property in as little as 24-48 hours. That’s why it’s important to act quickly if your commercial property experiences a water damage or you see any signs of hidden water or visible mold within your commercial facility. SERVPRO is a leading provider of mold remediation services across the country, our mold certified technicians can assess your commercial warehouse or building to evaluate the extent of your damage and advise owners and managers of the proper steps to remediate and restore your facility, “Like it never even happened.”

How mold damage affects your commercial warehouse or building?

Mold is a microscopic, airborne fungus that exists all around us, it occurs naturally in our surroundings and mostly reproduces by releasing spores into the environment. In nature, mold plays an important role in the decomposition of organic material. Mold requires both organic material and a consistent source of moisture to grow. Many materials in homes and business contain the organic materials conducive to mold growth. When excessive moisture accumulates indoors, drywall, wood, paneling, ceiling tiles, carpeting, insulation, paper, cardboard, fabric, upholstery and even paint will encourage mold growth. If there is a consistent water source, mold will continue to colonize and break down organic material into a dusty, dirt-like material. Leaving mold damage unattended to for an extended period can cause unnecessary damage to your home and possible health effects to the occupants. It’s never too early nor too late to address commercial property mold damage.

When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. It is impossible to eliminate all mold and mold spores in the indoor environment. However, mold growth can be controlled indoors by controlling moisture indoors.

The Environmental Protection Agency (EPA) recommends these tips to prevent commercial property mold damage

• Ensure all leaky plumbing is fixed; correct all noticed wet spots;
• Completely eliminate condensation through insulating or increasing air circulation;
• Reduce the moisture level in the air and add ventilation to reduce humidity;
• Maintain indoor humidity level below 60% with a goal of 30-50%;
• Conduct routine building and HVAC inspections;
• Provide proper drainage and sloping to eliminate wet foundations.

How does SERVPRO stop the spread of mold during the remediation process

SERVPRO mold remediation crew members are train to use the highest restoration industry standards, mastering Applied Microbial Remediation through IICRC courses. We employ the Environmental Protection Agency (EPA) developed protocols to contain and remove active mold colonies. Our crews also use EPA registered antimicrobial products to treat surfaces after removal to inhibit additional growth. During remediation, we protect our employees and your occupants from the hazards of mold remediation by creating zones where we remove and bag the mold and contaminated debris. Physical barriers provide one kind of protection, and we also install HEPA filtered exhaust ductwork and use negative air pressure to prevent airborne mold and residues from infiltrating unaffected areas of the building.

Containment of the Affected Area

One of the main concerns, when indoor mold is present, is the dissemination of airborne mold spores. When a remediation project is initiated the first step is to set up containment or isolation of the affected area. Containment will help our SERVPRO professionals control the spread of these spores while assisting the remediation process in returning the affected area to normal conditions. The act of removing or disturbing a mold source tends to distribute large quantities of mold spores into the air. If proper containment is not utilized, this can affect adjacent spaces to the work area and cause cross contamination.

When setting up containment of the work area, the first step is to install a HEPA Filtered Negative Air machine. This is a fan which pulls air from the affected area and exhausts the contaminated air outside of the structure via flexible tubing or ducting. Doing this will begin to draw the airborne mold spores away from the airspace, eventually creating a negative pressure environment.

The second step is to install physical barriers in the work area, creating zones. This is most typically done with the use of heavy plastic. The main goal when creating this physical barrier is to completely isolate the work area from any adjacent, non-affected areas. All HVAC systems or shared airways between other rooms would be taped or covered in plastic, and all electrical outlets and light fixtures would be covered. Basically, any area that could allow air flow between the mold infested area and another non-affected area should be properly sealed.

If you discover mold or are experiencing a musty odor in your commercial warehouse or building, call the professionals at SERVPRO of Oakdale/North Bay Shore to help. Our highly trained and IICRC certified Long Island mold remediation specialists are here to help, to explain and assess your property’s commercial mold cleanup and mitigation needs. Our priority is to keep you informed of your specific remediation solution and get your commercial property’s mold damage concerns under control. Our teams will cleanup, remove damage and remediate your commercial mold problem, restoring your facility, “Like it never even happened.”

Source: https://www.epa.gov/